Produk berhasil ditambahkan ke cart.
Jumlah
Jumlah
Terdapat 0 item pada cart Anda. 1 item di cart.
Total produk
(Termasuk pajak)
Total ongkos kirim (Termasuk pajak)
Ditentukan kemudian
Jumlah
(Termasuk pajak)
Lihat lebih detail
Westermo Viper-112 Managed Industrial Ethernet switch
Kode Produk: 30561
AI0816/ET7/L10Produk baru
Ports :
- 12 x 10/100BaseTX, M12 contact
- 1 x USB 2.0 host interface
- 1 x RS-232, 115.2 kbit/s
Info lainnya
Spesifikasi Westermo Viper-112 Managed Industrial Ethernet switch
| Product description | |
| Status | Active |
| Article number | 3641-0555 |
| Ports | 12 x 10/100BaseTX, M12 contact 1 x USB 2.0 host interface 1 x RS-232, 115.2 kbit/s |
| Description | EN 50155 Routing Switch |
| Warranty period | 5 Years |
| Standard compliance | |
| Environmental | EN 61373:1999, Railway applications – Rolling stock equipment. Shock and vibration tests IEEE1478:2001, Environmental conditions for transit rail car electronic equipment EN 50124-1: 2001+A1:2003+A2:2005, Railway applications – Insulation coordination Fire safety standard CEN 45545-2 |
| Reliability prediction | |
| MTBF, operating | 554 000 h (MIL-HDBK-217F (Gb) 25°C) |
| Service life, operating | 15 years |
| EMC (Electromagnetic Compatibility) | |
| EN 61000-6-1 | Immunity residential environments |
| EN 61000-6-2 | Immunity industrial environments |
| EN 61000-6-3 | Emission standard for residential, commercial and light-industrial environments. |
| EN 61000-6-4 | Emission industrial environments |
| EN 55022 +A1 | Emission IT equipment |
| EN 55024 | Immunity IT equipment |
| FCC part 15 | Class B |
| EN 50121-4 | Railway signaling and telecommunications apparatus |
| EN-50121-3-2 | Railway applications - EMC: Rolling stock – Apparatus |
| EN-50155 | Railway applications - Electronic equipment used on rolling stock |
| IEC 62236-4 | Railway signaling and telecommunications apparatus |
| EMC specifications | |
| EN 61000-4-2, ESD | Enclosure: Contact: ±6 kV Air: ±8 kV |
| EN 61000-4-4, fast transients | Power port, ±5 kV Signal ports, ±5 kV Earth port, ±1 kV |
| EN 61000-4-5, surge | Power port: L-E: ±0.5 kV, 12 Ω, 9 μF, 1.2/50 μs L-L: ±0.5 kV, 2Ω, 18 μF, 1.2/50 μs L-E: ±2 kV, 42 Ω, 0.5 μF, 1.2/50 μs L-L: ±2 kV, 42Ω, 0.5 μF, 1.2/50 μs L-E: ±8.4 kV, 100 Ω, 0.05/0.1 μs L-L: ±8.4 kV, 100 Ω, 0.05/0.1 μs |
| Ethernet ports: | L-E: ±1 kV, 2 Ω L-E: ±2 kV, 42Ω, 0.5 μF |
| EN 61000-4-8, power frequency magnetic field | Enclosure, 300 A/m; 0, 16.7, 50, 60 Hz |
| EN 61000-4-9, pulsed magnetic field | Enclosure, 300 A/m |
| IEC 61000-4-3, RF field AM modulated | Enclosure, 20 V/m @ (80 MHz – 2.7 GHz), 1 kHz sine, 80% AM |
| EN 61000-4-6, conducted RF immunity | Power port, 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz Ethernet ports, 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz Earth port, 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz |
| EN 55022, radiated RF emission | Enclosure, class B Power port, class B Ethernet ports, class B |
| FCC part 15, radiated RF emission | Enclosure, class B |
| Safety | |
| EN 60950-1, dielectric strength | Power port to all other ports, 1.5 kV ACrms, 50 Hz, 1 min Ethernet ports to all other ports, 1.5 kV ACrms, 50 Hz, 1 min |
| Safety | EN 60950-1, IT equipment |
| Climatic | |
| Temperature, operating | –40 to +70°C (–40 to +158°F) |
| Temperature, storage | –50 to +85°C (–58 to +185°F) |
| Humidity, operating | 5 to 95 % relative humidity |
| Humidity, storage | 5 to 95 % relative humidity |
| Mechanical | |
| IEC 60068-2-6, vibration | Non operating long life simulation, 7.9 m/s² (RMS) 5 – 150 Hz |
| Vibration, random functional | Operating, 1 m/s² (RMS) 5 – 150 Hz |
| IEC-60068-2-27, shock | Operating, 5 g, 30 ms |
| IEC 60068-2-27, bump | Operating, 10 g, 11 ms |
| Interface specifications, power | |
| Operating voltage | Rated: 24 to 110 VDC Operating: 24 to 110 VDC ± 30% Operating for 100 ms: 24 to 110 VDC ±40% |
| Rated current | 350 mA @ 24 V and 90 mA @ 110 V |
| Rated frequency | DC |
| Inrush current | 1 mA²s @ 24V and 6 mA²s @ 110V |
| Startup current | 400 mA |
| Polarity | Reverse polarity protected |
| Redundant power input | Yes |
| Isolation to | 1500 VAC rms to all other |
| Connection | 4 pin male M12 A-coded connector, use Westermo cable 3146-1106 for 1.5 m 3146-1107 for 5 m |
| Connector size M12, | recommended cable area 0.5 mm² recommended (minimum 0.25 mm²), cable dimensions depend on choice of M12 connector |
| Interface specifications, 10/100BaseTX | |
| Electrical specification | IEEE IEEE std 802.3. 2005 Edition |
| Data rate | 10 Mbit/s, 100 Mbit/s, manual or auto |
| Duplex | Full or half, manual or auto |
| Circuit type | TNV-1 |
| Transmission range | Up to 150 m with CAT5e cable or better |
| Isolation to | Other Ethernet ports, 1500 VAC rms USB and CON or SRV1 and SRV2, 1500 VAC rms DC, 1500 VAC rms |
| Connection | 4-pin M12 D-code, auto MDI/MDI-X, use e g Westermo cable 3146-1100 M12-M12 – 1 m 3146-1101 M12-M12 – 5 m 3146-1103 RJ45-M12 – 1 m 3146-1104 RJ45-M12 – 5 m |
| Shielded cable | Not required, but recommended in severe electromagnetic environments |
| Conductive housing | Yes |
| Number of ports | 12 |
| Interface specifications, USB | |
| Electrical specification | USB 2.0 host interface |
| Data rate | Up to 480 Mbit/s (high-speed mode) |
| Maximum supply current | 500 mA |
| Circuit type | SELV |
| Isolation to | Ethernet ports, 1500 VAC rms DC, 1500 VAC rms No isolation to CON |
| Connection | 5-pin M12 female A-code, use Westermo USB plug 3641-0190 |
| Interface specifications, console | |
| Electrical specification | RS-232 |
| Data rate | 115.2 kbit/s |
| Data format | 8 data bits, no parity, 1 stop bit, no flow control |
| Circuit type | SELV |
| Isolation to | Ethernet ports, 1500 VAC rms DC, 1500 VAC rms No isolation to USB |
| Connection | 5-pin M12 female B-code, use Westermo cable 1211-2215 |
Berat dan ukuran Westermo Viper-112 Managed Industrial Ethernet switch
| Dimensions (W x H x D) | 175 x 62.5 x 100 mm |
| Weight | 1.4 kg |
Ringkasan Produk Westermo Viper-112 Managed Industrial Ethernet switch
Viper - 112 adalah dikelola 12 port switch yang dirancang untuk memenuhi persyaratan penuh dari pasar kendaraan rel . The sangat kompak dan kuat perumahan memastikan unit dapat dibangun ke ruang rapat dan bermusuhan lingkungan . Sistem operasi Westermo WeOS menyediakan suite yang luas dari standar jaringan IP yang memungkinkan jaringan tangguh dan fleksibel yang akan dibuat , memenuhi kebutuhan pasar kereta api .Protokol dan fungsi
Ketahanan dan ketersediaan tinggi Cepat rekonfigurasi dari Topologi Jaringan (frnt)
- Frnt Link Protocol Kesehatan (FLHP)
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w cepat STP (RSTP)
Layer 2 beralih IEEE 802.1Q Static VLAN dan VLAN Tagging
- IEEE 802.3x Flow Control
- IGMPv2 / v3 mengintai
- AVT Dinamis VLAN (Adaptive VLAN Trunking)
- Manajemen VLAN (manajemen Antarmuka konsep)
- Statis Multicast MAC filter
Layer 2 QoS IEEE 802.1p Class of Service
- Klasifikasi: tag VLAN, VLAN ID, IP DSCP / ToS, Pelabuhan ID
Layer 2 keamanan Pengendalian IEEE 802.1X Pelabuhan Access
- MAC Authentication
alat Manajemen pengelolaan
- Web antarmuka (HTTP dan HTTPS)
- CLI melalui port console dan SSHv2 dan Telnet
- alat Westermo ipconfig
- SNMPv1 / V2C / v3
- manajemen Fleksibel konfigurasi dan file log
- Secure Copy (SCP)
- manajemen file lokal melalui HTTP, FTP, TFTP dan SCP
- Load / menyimpan file dari / ke memori USB stick
- alarm fleksibel / event sistem penanganan
- Syslog (log file dan server syslog remote)
- Digital I / O
- Port Pemantauan
- SNTP (NTP client)
- PPPoE client
- klien DHCP
- DHCP agen relay (DHCP option 82)
- DDNS
SNMP MIB dukungan RFC1213 MIB-2
- RFC2863 Antarmuka MIB (ifXTable)
- RFC2819 RMON MIB (etherStatsTable)
- RFC4188 Bridge MIB
- RFC4318 RSTP MIB
- RFC4363 Q-BRIDGE MIB (dot1qVlan dan dot1qVlanStaticTable)
- RFC4836 MAU MIB (dot3IfMauBasicGroup dan dot3IfMauAutoNegGroup)
- RFC4133 Entity MIB (entityPhysical)
- RFC3433 Entity Sensor MIB
- WESTERMO PRIVATE MIB
