Panasonic PT-LX26H Proyektor XGA 2600 Lumens

Spesifikasi Panasonic Panasonic PT-LX26H Proyektor XGA 2600 Lumens

LCD Panel

• Panel size   0.55" (14 mm) diagonal, 
• (4:3 aspect ratio)
• Display method   Transparent LCD panel (x3, R/G/B)
• Pixels   786,432 (1,024 x 768) x3, Total pixels: 2,359,296
• Lens   Manual zoom (1.2x) / Manual focus F2.10-2.25, f19.11 mm
• Lamp   230 W UHM™, lamp replacement cycle (lamp power: High, NORMAL/ECO): 3,000 hrs/4,000 hrs)*1
• Screen size   0.76 - 7.62 m / 30 - 300 inches diagonally
• Brightness*2 (lamp power: high)   2,600 lumens
• Center-to-corner uniformity ratio*2    85%
• Contrast ratio*2    500:1 (full on/full off, lamp power: high)
• Resolution*3   1,024 x 768 pixels

Scanning frequency

• RGB (analog)   fH: 15 kHz - 100 kHz, fV: 50 Hz - 100 Hz, 
• dot clock: 140 MHz or lower (Signals exceeding 140 MHz are downsampled.)
• YPbPr (YCbCr)   fH 15.75 kHz, fV 60 Hz (480i [525i]) / fH 31.50 kHz, fV 60 Hz (480p [525p])
• fH 15.63 kHz, fV 50 Hz (576i [625i]) / fH 31.25 kHz, fV 50 Hz (576p [625p])
• fH 37.50 kHz, fV 50 Hz (720 [750]/50p) / fH 45.00 kHz, fV 60 Hz (720 [750]/60p)
• fH 33.75 kHz, fV 60 Hz (1080 [1125]/60i) / fH 28.13 kHz, fV 50 Hz (1080 [1125]/50i)
• S-Video / Video   fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] / 
• fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
• Optical axis shiftt   6:1
• Keystone correction range   Vertical: approx. ±30° (±20° auto keystone)
• Installation   Ceiling/floor, Front/rear
• Built-in Speaker   --

Terminals

• Computer IN 1 /
• S-VIDEO IN   D-sub HD 15 pin (female) x1 (RGB / YPbPr / YCbCr / S-VIDEO x1) 
• (The D-sub/S-VIDEO conversion cable [ET-ADSV] is required for inputting S-VIDEO signals.)
• Computer IN 2 /
• Monitor OUT   --
• Video IN   RCA (Composite VIDEO)
• Audio IN   --
• Computer audio IN   --
• Serial IN   D-sub 9 pin (male) x1, for external control (RS-232C compliant)
• LAN   RJ-45 x1 (for network connection, 10Base-T/100Base-TX, Compliant with PJLink™, Class 1)

General

• Power supply   100-240 V AC, 50/60 Hz
• Power consumption   297 W (0.47 W when standby mode is set to ECO*4)
• 8.6 W in Serial standby mode
• Operating noise   37 dB (Lamp mode: HIGH), 34.1 dB (Lamp mode: NORMAL), 29 dB (Lamp mode: ECO)
• Operating temperature   5° - 35°C
• Humidity   20% - 80% (no condensation)
• Dimensions (W x H x D)   349 x 105 x 247 mm (without protruding parts)
• Weight   2.90 kg
• Power cord   2 m
• Cabinet material   Moulded plastic

*1 The values given for the recommended lamp replacement cycles are maximum and may differ depending on usage. 
*2 Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
*3 Input signals that exceed this resolution will be converted to the native resolution.
*4 When the standby mode is set to ECO, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.


Note: Weights and dimensions shown are approximate. Specifications are subject to change without notice.  

Ringkasan Produk Panasonic PT-LX26H Proyektor XGA 2600 Lumens

2.600 Lumens XGA proyektor portabel 


Kinerja Luar Biasa

• 2.600 lumens brightness
• Kontras 2500:1
• 4.000 jam * 1 pakai lampu, dan 4.000 jam * 2 siklus penggantian filter udara
• Tenang 29 dB * 2 tingkat kebisingan
• XGA (1024 x 768) resolusi

Setup dan Operasi Mudah

• Koreksi keystone real time
• 1.2x zoom lensa
• Auto pencarian masukan sinyal dan panduan pada layar
• Warna gambar mode dan papan
• Berbagai terminal
• Fungsi kenyamanan untuk berbagai aplikasi (Timer, Freeze frame, Digital zoom)

Fitur lain

• Daya langsung off
• Anti-pencurian dan fungsi keamanan dengan disesuaikan start up logo
• Proyektor ID untuk alokasi remote control (sampai 6 proyektor)
• Built-in tertutup keterangan decoder
• Untuk informasi harga pada produk ini, silahkan pilih "hubungi kami - email" dari "support" menu di bagian atas halaman ini. Pilih "Profesional pencitraan, Penyajian dan layar" dari "Kategori Produk" menu dan mengisi formulir.

* 1 ini adalah nilai maksimum ketika kekuatan lampu diatur ke mode ECO dengan lampu dihidupkan selama 2 jam dan off selama 0,25 jam. Peningkatan lampu pada siklus atau penggunaan yang berkepanjangan dengan lampu terus dinyalakan akan memperpendek siklus penggantian lampu. Ketika kekuatan lampu diatur ke Normal, siklus penggantian lampu adalah 3.000 jam. Lingkungan penggunaan mempengaruhi siklus penggantian lampu. * 2 Dengan kekuatan lampu diatur ke mode ECO.